top of page
Step 1
The T-Bar is a length of stainless steel bar tapped to accept an all thread rod with a washer and nut. It can be used to attach a sculpture to a pedestal or a pad.
Step 2
Tie a string around the center of the bar, slip It into the large hole in the sculpture base and pull it against the hole while threading the rod into the bar.
Step 3
Use tape to secure the taught string against the sculpture base.
Step 4
Elevate the sculpture on its side high enough to allow the pedestal or pad to slip over the threaded rod. Secure a nut and washer finger tight. Do not over tighten.
Step 5
Carefully stand the sculpture taking care not to suspend too much unsupported weight.
bottom of page