top of page
![Step 1](https://static.wixstatic.com/media/b75a77_e65d6bc6d2024fa0a51ac961b8e18bcd.jpg/v1/fill/w_147,h_98,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/b75a77_e65d6bc6d2024fa0a51ac961b8e18bcd.jpg)
Step 1
Stone or concrete slabs may be used as a pad.
![Step 2](https://static.wixstatic.com/media/b75a77_e33946b6356344baa4281cc03955d63e.jpg/v1/fill/w_147,h_113,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/b75a77_e33946b6356344baa4281cc03955d63e.jpg)
Step 2
The underside of the sculpture has holes. Center the sculpture on the pad. Locate the largest hole and drill a 1” hole through the pad at that point.
![Step 3](https://static.wixstatic.com/media/b75a77_8a79d74853e64eec9cf8e2a5e999cafe.jpg/v1/fill/w_147,h_221,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/b75a77_8a79d74853e64eec9cf8e2a5e999cafe.jpg)
Step 3
Cut a piece of 1” pipe about 1’ longer than the sculpture is tall. Drive it through the pad into the ground. Measure to be sure pipe is lower than sculpture.
![Step 4](https://static.wixstatic.com/media/b75a77_2110e2f457bd4eada5e277c571634093.jpg/v1/fill/w_147,h_240,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/b75a77_2110e2f457bd4eada5e277c571634093.jpg)
Step 4
Lower sculpture carefully over the pole onto the pad.
bottom of page